 |
 |
|
Thank you very much! |
Thanks for the great products and all your support. I look forward to my next stage of mods. - Jae |
 |
|
|
DashDAQ
Zeitronix DashDAQ Touch Screen Display and Datalogger
Zeitronix-DashDAQ display is Preconfigured for easy Plug and Play use with the Zt-2 Display and data log AFR, RPM, EGT, Vacuum/Boost, TPS, and User Input from your Zt-2
Run a Dual Zt-2 configuration for left and right cylinder bank AFR values!
4" Touch-Screen offers 480x272 resolution using TFT LCD technology.
24-bit full color display with contrast ratio of 350:1
Dimensions are 4.6” x 2.75” x 1”, weight is only 0.5 lbs, (117mm x 70mm x 26mm, 273 grams)
Full OBDII support for display of parameters such as Mass Air Flow, Spark Advance, Coolant Temperature, and many more! (OBDII is not required for use with the Zt-2.)
Data logging support onto removable memory card -- no laptop or PDA required.
Auto Adjusting backlight, night mode, and low power standby.
Calculate Horsepower, Torque, 0 to 60 Performance, MPG and set configurable trip counters.
Diagnose and clear check engine light error codes.
OBDII and Plug and Play Zeitronix Zt-2 cables included.
Simple and secure windshield-mounted display.
Optional GPS Navigation support with software developed by Drew Tech and Elektrobit.
Configurable Screens
Full color analog gauges
Different 'skins' allow you to change the look and style of your display.
Many other page layouts and styles available.
Graph Zt-2 data points in real time: AFR, RPM, TPS, EGT, Vacuum-Boost, and User Input!
Mix and Match OBDII and Zt-2 data.
Data Logging:
Log Zt-2 and OBDII data on optional MMC/SD memory cards (up to 4GB in size).
Supports Full OBDII for 1996 and newer vehicles (Zt-2 parameters from any vehicle)
Log and View up to 24 parameters at once for hours at a time.
Zt-2 - DashDAQ connector cable included.
Connect two to log left and right cylinder banks in our Dual Zt-2 configuration.
**** This is the addition of a DashDAQ to your existing Zt-2 system. Includes DashDAQ™ and cable required to connect to the Zt-2. The Display is preconfigured with Zeitronix driver and screens.
All Zeitronix add-ons such as the exhaust gas temperature ( EGT ), boost sensor ( MAP ), LCD or zr-1 and zr-2 round gauges, dashdaq, zavt-1, tcac, relays, and wiring in your own user input can all be added to your base Zeitronix zt-2 kit at a later time.
|
 |