This is a complete in-cabin boost controller kit for a Dodge SRT4. This will be EVERYTHING you need to adjust the boost pressure to your SRT4 from the drivers seat. This setup bypasses the stock boost control and gives you full control. Included is 12.5 feet of hose to route the line from the engine bay into the cockpit. Thick, durable hosing was used so there would be no issues with hose swelling or hoses blowing off. I will also include instructions and high resolution pictures to make this a very easy installation. The valves will be shipped closed (stock boost). Install it and adjust it to your desired boost. No tools needed for adjusting the valve! Definitely the best bang for the buck mod you can do to a turbo car. As a general rule, turbos make 10hp per one psi of boost increase over stock. This valve is adjustable from 11psi (stock) to 25+psi (We wouldn’t recommend this without proper fuel management). You will not need to replace this part as you continue to modify your car. The more performance modifications you do to your car the better this will respond. This part really does make you more power! All the pieces were picked out to be durable and last. This kit will not fall apart! It is fully tunable while driving the car. No more having to pull over, pop the hood, and make adjustments! That is a huge advantage over an under-hood boost controller.

Un-installation of the kit will take about three minutes if you ever need to bring the car back to stock form with no traces that it ever existed.

This can be used for any turbo application but the hoses are cut specifically for the Dodge SRT4. For other applications you will most likely need to cut down or replace the hoses to fit properly.

** This kit is for off-road use only!

**Buyer assumes all responsibility with this part. We are not responsible for misuse or improper tuning!